Brand: Tesla
Voltage: 230v Single phase
Color: Silver
Number of Phases: 1
Connector Type: NACS
Amperage: 40
Model: 1050074-01-B
Manufacturer Part Number: 1050074-01-B
Level: 2
Material: Plastic
Country of Origin: United States
Charging Rate: 9.6kw
UPC: N/A
Genuine Tesla Gen 2 Wall Connector EV Charger – J1772 – 40 AMP + WALL MOUNT BRACKET
Part Number: 1050074-01-B
For sale is a Genuine Tesla Gen II Wall Connector equipped with an SAE J1772 charging connector.
This unit is USED, TESTED, and FULLY WORKING. It has been tested for proper operation prior to sale.
IMPORTANT – J1772 CONNECTOR
This Wall Connector is equipped with a J1772 vehicle connector, making it compatible with many electric and plug-in hybrid vehicles that use the standard J1772 charging port.
TESLA VEHICLES REQUIRE THE CORRECT J1772-TO-TESLA/NACS ADAPTER TO USE THIS CHARGER.
The adapter is NOT included unless specifically shown in the listing photos.
Tesla offers an SAE J1772 Charging Adapter that allows Tesla vehicles to charge from J1772 charging equipment.
VEHICLE COMPATIBILITY
This charger can be used directly with vehicles equipped with a J1772 AC charging port, including many models from:
- Chevrolet – Bolt EV, Bolt EUV, Volt and others
- Ford – Mustang Mach-E and other J1772-equipped models
- Jeep – Wrangler 4xe, Grand Cherokee 4xe
- BMW – i3 and many BMW plug-in hybrid models
- Volkswagen – ID.4 and other J1772-equipped models
- Audi – e-tron models with J1772 charging
- Porsche – Taycan and other compatible models
- Mercedes-Benz – EQ and plug-in hybrid models with J1772
- Hyundai – IONIQ and Kona Electric models with J1772
- Kia – Niro EV, EV6 and other J1772-equipped models
- Nissan – LEAF and other J1772-equipped vehicles
- Toyota – Prius Prime, RAV4 Prime, bZ4X and other compatible models
- Subaru – Solterra and compatible plug-in models
- Honda – Clarity and other J1772-equipped models
- Rivian and other EVs equipped with a compatible J1772 AC charging inlet
Vehicle charging ports can vary by model year. Please verify your vehicle's charging connector before purchasing.
TESLA COMPATIBILITY
Tesla vehicles can also be charged with this Wall Connector when using the proper SAE J1772-to-Tesla/NACS adapter.
Compatible Tesla vehicles include:
- Tesla Model S
- Tesla Model 3
- Tesla Model X
- Tesla Model Y
- Tesla Cybertruck
J1772-to-Tesla/NACS adapter is required and is not included unless pictured.
SPECIFICATIONS
- Manufacturer: Tesla
- Part Number: 1050074-01-B
- Product: Gen II Wall Connector
- Connector: SAE J1772
- Maximum Charging Current: 40 Amps
- Input: 208V / 240V AC
- Phase: Single Phase
- Maximum Power: Approximately 9.6 kW at 240V / 40A
- Charging Level: Level 2 AC
- Cable Length: Approximately 24 ft
- Installation Type: Hardwired
- Application: Indoor / Outdoor EV Charging
Actual charging speed will depend on the vehicle's onboard charger, electrical installation, circuit capacity and other factors.
CONDITION
USED – TESTED – FULLY WORKING WITH WALL MOUNT
This is a previously installed charger and may show normal cosmetic signs of use, including scratches, scuffs, marks or other signs of installation/removal.
Please review all listing photos carefully for the exact cosmetic condition and everything included with your purchase.
PLEASE NOTE
This is a hardwired EV Wall Connector and should be installed on the appropriate electrical circuit by a qualified electrician.
Please verify part number 1050074-01-B, J1772 compatibility, electrical requirements and vehicle compatibility prior to purchase.